Calcium silicon alloy powder

HOME > News

Advantages of silicon-calcium alloy powder: The method of adding silicon-calcium alloy in the steelmaking process is to add block alloy to the ladle and put it into the bottom of the ladle, or add block alloy to molten steel during the tapping process. The amount of smoke generated during the addition of the alloy is very large, which even affects the viewing of the steel flow during the tapping process. In addition, the utilization rate of calcium is very low, only about 5%.

The spray metallurgy process of spraying silicon-calcium alloy powder into the ladle has improved the nozzle clogging problem of continuous casting steel, but due to technical problems such as carrier gas pressure, flow rate, powder fluidity, spray gun and molten steel nitrogen absorption during powder spraying Difficult to properly solve, spray metallurgy technology has not been promoted. Instead, milling, wrapping, and wire feeding technologies have emerged. This technology has developed rapidly due to its advantages of less investment, simplified operation, accurate microalloying of steel, and high element recovery rate.

When silicon-calcium alloy is fed into molten steel in the form of cored wire, the utilization rate of calcium can reach more than 12%, which is 1.5 times that of block silicon-calcium when it is added to molten steel.
Contact Us Today!
We welcome inquiries in English, Español (Spanish), Русский язык (Russian), Français (French), and العربية (Arabic). Our professional team will reply to you within one business day. Please feel FREE to contact us!
Your privacy is important to us,we are committed to marking sure your privacy is confidential.
Top