Semi-coke, also known as semi-coke, is fired from the high-quality Jurassic clean coal abundant in the Shenfu (Shenmu + Fugu) coalfield. As a new type of carbon material, it is widely used in calcium carbide, ferroalloy, and blast furnaces. Injection, boiler fuel, civil fuel, industrial gas production and many other fields.
The production of semi-coke is mostly based on low-temperature dry distillation, and the dry distillation temperature is generally controlled between 600°C and 750°C. In the process of producing semi-coke, by-products such as gas and coal tar are generated at the same time.
Calcium carbide is the largest consumption area downstream of semi-coke; semi-coke is mainly used in the smelting of ferrosilicon in ferroalloy smelting; semi-coke is a new blast furnace injection fuel, and we think it is possible to replace traditional injection coal in the field of blast furnace injection It is an area where future consumption growth is relatively prominent.
The production of semi-coke is mostly based on low-temperature dry distillation (that is, the process of low-temperature pyrolysis of coal under air-isolated conditions), and the dry distillation temperature is generally controlled between 600°C and 750°C. In the process of producing semi-coke, by-products such as gas and coal tar are generated at the same time. The production of semi-coke mainly uses long-flame coal, non-caking coal, weakly caking coal and other non-caking or weakly caking, medium-to-high volatile bituminous coal.
Traditional blue charcoal furnaces include external heating and internal heating. The external heat type adopts the retort method of flue heating, the furnace type is complicated, the thermal efficiency is low, and the investment is about three times that of the internal heat type.
At present, the semi-coke furnace mainly used in the market is the vertical three-stage furnace type (internal heating type), and the SJ low-temperature carbonization furnace is the main one. The semi-coke device is mainly composed of coal preparation section, carbonization section, screening section, gas purification section and other parts.
On the raw material side, semi-coke is mainly produced using raw coal (long-flame coal, non-caking coal, weakly caking coal, etc.), and the average production of 1 ton of semi-coke requires 1.6-1.7 tons of raw coal. At the same time, by-product coal tar and gas can be obtained (about 0.1-0.16t coal tar, about 900-1500m3 gas).
At the end consumer side, semi-coke is widely used in many fields such as calcium carbide production, ferroalloy smelting, blast furnace injection (replacing anthracite), boiler fuel, civil fuel, and industrial gas production.
Among them, calcium carbide (calcium carbide, an important basic chemical raw material, mainly used to produce acetylene gas, and also used in organic synthesis, oxyacetylene welding, etc.) is the largest consumption area downstream of semi-coke, with an average consumption of about 0.85 per ton of calcium carbide. tons of semi-coke.
In addition, semi-coke is mainly used in the smelting of ferrosilicon in ferroalloy smelting (Note: China Metallurgical Standard (YB/T034-92) stipulates the technical requirements of ferroalloy coke, and the particle size is required to be 2-8mm, 8-20mm, 8-25mm Therefore, the semi-coke used in smelting ferrosilicon is semi-coke small material), and the average consumption of semi-coke per ton of ferrosilicon is about 11,500-12,000 tons.
Finally, as a new type of blast furnace injection fuel, semi-coke may replace traditional injection coal in the field of blast furnace injection, and may be an area where future consumption growth will be more prominent.
The production of semi-coke is mostly based on low-temperature dry distillation, and the dry distillation temperature is generally controlled between 600°C and 750°C. In the process of producing semi-coke, by-products such as gas and coal tar are generated at the same time.
Calcium carbide is the largest consumption area downstream of semi-coke; semi-coke is mainly used in the smelting of ferrosilicon in ferroalloy smelting; semi-coke is a new blast furnace injection fuel, and we think it is possible to replace traditional injection coal in the field of blast furnace injection It is an area where future consumption growth is relatively prominent.

The production of semi-coke is mostly based on low-temperature dry distillation (that is, the process of low-temperature pyrolysis of coal under air-isolated conditions), and the dry distillation temperature is generally controlled between 600°C and 750°C. In the process of producing semi-coke, by-products such as gas and coal tar are generated at the same time. The production of semi-coke mainly uses long-flame coal, non-caking coal, weakly caking coal and other non-caking or weakly caking, medium-to-high volatile bituminous coal.
Traditional blue charcoal furnaces include external heating and internal heating. The external heat type adopts the retort method of flue heating, the furnace type is complicated, the thermal efficiency is low, and the investment is about three times that of the internal heat type.
At present, the semi-coke furnace mainly used in the market is the vertical three-stage furnace type (internal heating type), and the SJ low-temperature carbonization furnace is the main one. The semi-coke device is mainly composed of coal preparation section, carbonization section, screening section, gas purification section and other parts.
On the raw material side, semi-coke is mainly produced using raw coal (long-flame coal, non-caking coal, weakly caking coal, etc.), and the average production of 1 ton of semi-coke requires 1.6-1.7 tons of raw coal. At the same time, by-product coal tar and gas can be obtained (about 0.1-0.16t coal tar, about 900-1500m3 gas).
At the end consumer side, semi-coke is widely used in many fields such as calcium carbide production, ferroalloy smelting, blast furnace injection (replacing anthracite), boiler fuel, civil fuel, and industrial gas production.
Among them, calcium carbide (calcium carbide, an important basic chemical raw material, mainly used to produce acetylene gas, and also used in organic synthesis, oxyacetylene welding, etc.) is the largest consumption area downstream of semi-coke, with an average consumption of about 0.85 per ton of calcium carbide. tons of semi-coke.
In addition, semi-coke is mainly used in the smelting of ferrosilicon in ferroalloy smelting (Note: China Metallurgical Standard (YB/T034-92) stipulates the technical requirements of ferroalloy coke, and the particle size is required to be 2-8mm, 8-20mm, 8-25mm Therefore, the semi-coke used in smelting ferrosilicon is semi-coke small material), and the average consumption of semi-coke per ton of ferrosilicon is about 11,500-12,000 tons.
Finally, as a new type of blast furnace injection fuel, semi-coke may replace traditional injection coal in the field of blast furnace injection, and may be an area where future consumption growth will be more prominent.
Contact Us Today!
We welcome inquiries in English, Español (Spanish), Русский язык (Russian), Français (French), and العربية (Arabic).
Our professional team will reply to you within one business day. Please feel FREE to contact us!
Your privacy is important to us,we are committed to marking sure your privacy is
confidential.
